3. Disassembly & Reassembly
3. Disassembly & Reassembly
3.1. Overall Disassembly & Reassembly
CAUTION
•
Be sure to separate the power cord before
disassembling the unit.
•
Discharge the capacitors first when separating PCB’s
with high capacity capacitors such as SMPS, X
Main Board, Y Main Board, etc. (A spark may be
generated by the electric charge, and there is danger
of electronic shock.)
•
Check that the cables are properly connected
referring to the circuit diagram when disassembling
or assembling the unit taking care not to damage the
cables
•
Take care not to scratch the Glass Filter in the front.
•
Assemble the boards in the reverse order of the
disassembly.
•
The plasma must be layed down on a flat padded
surface for disassembly and reassembly.
1.
Place monitor face down on cushioned table. Remove
screws from the Stand. Remove stand.
* Rear view of 43"
<43" PDP>
<43" PDP>
6001–002621 : M4 * L8
3-1
Copyright© 1995-2011 SAMSUNG. All rights reserved.
