English - 8
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎
To return to the previous step, press the Red button.
1
Selecting a language Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Selecting
Store
Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail
environments.
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
MENU
for 5 sec.
Store Demo
is only for shop display. If you select it, several
functions are not able to use. Please select
Home Use
when you
watch at home.
3
Selecting a country
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the
appropriate country.
✎
After selecting the country in the
Country
menu, some models may proceed
with an additional option to setup the pin number.
✎
When you input the PIN number, “0-0-0-0” is not available.
4
Setting the
Clock
Mode
Set the
Clock Mode
automatically or manually.
Auto
: Select the time zone where you are located.
Manual
: Allows you to manually set the current date and time.
5
Selecting an antenna Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the Antenna
source to memorise.
6
Selecting a channel
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the channel
source to memorise. When setting the antenna source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to
Channel
→
Auto Tuning
.
7
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
P
POWER
[PD450-ZG]BN68-03491C-01L04.indb 8
2011-02-21 오후 10:32:10
