Samsung PS42B430P2W User Manual Download

Page: 32 / 41

English

Using the M

enus

Support menu

Support

Option

Description

Self Diagnosis

Picture Test

■

Sound Test

Signal Information

If you think you have the Picture, Sound, Signal problem,

perform the test. You can check the problem state.

If you hear no sound from the TV’s speakers, before

•

performing the sound test, make sure

Speaker Select

is set to

TV speaker

in the

Sound

menu.

The melody will be heard during the test even if

•

Speaker Select

is set to

External Speaker

or the

sound is muted by pressing the

MUTE

button.

If the signal strength meter indicates that the signal is

•

weak, physically adjust your antenna to increase the

signal strength.Continue to adjust the antenna until you

find the best position with the strongest signal.

Software Upgrade

To keep your product up-to-date with new Digital Television

features then software upgrades are periodically broadcast

as part of the normal Television signal. It will automatically

detect these signals and display the software upgrade

banner. You are given the option to install the upgrade.

By USB

■

Insert a USB drive containing the firmware upgrade into TV.

Please be careful to not disconnect the power or remove

the USB drive while upgrades are being applied. The TV

will turn off and turn on automatically after completing the

firmware upgrade. Please check the firmware version after

the upgrades are complete. When software is upgraded,

video and audio settings you have made will return to their

default (factory) settings. We recommend you write down

your settings so that you can easily reset them after the

upgrade.

By Channel

■

Upgrades the software using the broadcasting signal.

Standby Mode Upgrade

■

To continue software upgrade with master power on,

Select On by pressing the ▲ or ▼ button. 45 minutes after

entering standby mode, a manual upgrade is automatically

conducted. Since the power of the unit is turned on

internally, the screen may be on slightly for the product. This

phenomenon may continue for more than 1 hour until the

software upgrade is completed.

Alternative Software

■

Replace the current software with the alternative.

HD Connection Guide

The brief instruction on

How to get the best performance

from your new HDTV

is displayed. We offer the connection

method for HD devices.

Contact Samsung

You can know the Samsung Call center, website and

information for product.

You can move the previous or next page by pressing

■

the ▲ or ▼ button.

TV Rear Panel

USB Drive

BN68-02353D.indb 32

2009-06-30 �� 10:22:43

Summary of Contents for PS42B430P2W










































Search results

Summary of Contents for PS42B430P2W

Reviews:

Related manuals for PS42B430P2W

Brands by name

Popular brands

Samsung PS42B430P2W, User Manual

Search results

Summary of Contents for PS42B430P2W

Reviews:

Related manuals for PS42B430P2W

Brands by name

Popular brands