English - 49
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1
Press the
button.
Press the ▲ or ▼ button to select
Receiver
, then press the
ENTER/OK
button.
2
Press the ◄ or ► button to select to
On
, then press the
ENTER/OK
button.
Now you can listen to sound through the receiver.
3
Press the
EXIT
button to exit.
➢
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
➢
If the receiver is exclusively for a home theater only (supporting
audio only), it may not appear in the device list.
➢
Only when you have connected the optical jack of the TV and
the receiver properly, does Receiver work.
➢
In case of a content with copyright problems, listening through the receiver may not properly operate.
➢
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom
Solution
does not work.
■ Check if the device is an device. The system
supports devices only.
■ Connect only one receiver.
■ Check if the device power cord is properly connected.
■ Check the device’s Video/Audio/HDMI 1.3 cable connections.
■ Check whether (HDMI-CEC) is set to On in the
setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is exclusive remote control.
■ doesn’t work at a certain condition. (Searching channels)
■ When connecting or removing the HDMI 1.3 cable, please make
sure to search devices again or restart your TV.
■ Check if the Function of device is set on.
I want to start .
■ Check if the device is properly connected to the TV and
check if the (HDMI-CEC) is set to On in the Setup
menu.
■ Press the
TV
button on the TV remote control to switch to TV. Then
press the button to show the
menu and select a
menu you want.
I want to exit .
■ Select
View TV
in menu.
■ Press the
SOURCE
button on the TV remote control and select a
device other than devices.
■ Press any of
CH
,
CH LIST
, and
PRE-CH
to change to the
TV mode. (Note that the channel button operates only when a
tuner-embedded device is not connected.)
The message Connecting to
device… appears on
the screen.
■ You cannot use the remote control when you are configuring
or switching to a view mode.
■ Use the remote control when the setting or switching to
view mode is complete.
The device does not
play.
■ You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
■ Check whether or not the device supports functions.
■ Check whether or not the HDMI 1.3 cable is properly connected.
■ Check whether (HDMI-CEC) is set to On in the
setup menu.
■ Search devices again.
■ You can connect an device using the HDMI 1.3 cable only.
Some HDMI cables may not support functions.
The TV programme cannot be
recorded.
■ Check whether the antenna jack on the recording device is properly
connected.
The TV sound is not output
through the receiver.
■ Connect the optical cable between TV and the receiver.
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:On
Setup
TV P 1
Exit
BN68-01183N,P-00Eng_CIS.indd 49
2007-05-22 ¿ÀÀü 9:43:31
