manualshive.com logo in svg

Samsung PS-42D4ST, Owner'S Instructions Manual

Share
Download
Samsung PS-42D4ST Owner'S Instructions Manual Download Page 13

13

ENG

Installing the Display on the Wall Attachment Panel

1

Remove the screws from the back of the PDP.

2

Use the screws and assemble the plastic hanger.

☛

◆

Please ask the installers to install the wall mount bracket.

◆

Please be sure to check if the plastic hanger is completely secured on both the left and right
side after hanging the PDP on the wall mount bracket.

◆

Please avoid catching your fingers while installing and adjusting the angle.

◆

Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP.

3

Tighten the screws of the plastic hanger to the back side of the PDP.

4

Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (

!

) to

secure it to the wall mount bracket (

@

). Tighten the screws as shown (

#

) so that the PDP cannot be

separated from wall mount bracket.

➢

The exterior of the PDP may be different than the picture.
(Assembly and installation of the plastic hanger is the same.)

PDP panel

Wall attachment panel bracket

Wall

BN68-00689A-00_Eng  3/20/04  9:45 AM  Page 13

Summary of Contents for PS-42D4ST













































Reviews:

No comments

Brands by name

Popular brands

Load more brands