English -
Updating the Channel List Automatically
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
1.
Press the
D.MENU
button to display the DTV menu.
2.
Press the
▲ or ▼
button to select "Channel", then press
the
ENTER/OK
button.
.
Press the
ENTER/OK
button again, to select "Auto Store".
Then press the
ENTER/OK
button.
4.
When it has finished, the number of scanned services will
be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the
ENTER/OK
button with "STOP" selected.
5.
Press the
EXIT
button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
Updating the Channel List Manually
You can specify the channel or frequency for a
fast channel search.
1.
Press the
D.MENU
button to display the DTV menu.
2.
Press the
▲ or ▼
button to select "Channel", then press
the
ENTER/OK
button.
.
Press the
▲ or ▼
button to select "Manual Store", then
press the
ENTER/OK
button.
4.
To...
Then...
Move to "Channel",
"Frequency", or "Bandwidth"
◄ or ► button
Set the "Channel", or
"Bandwidth"
▲ or ▼ button
Set the "Frequency"
Numeric button (0~9)
• Channel:
Channel "7-12" to "21-69" in sequence are displayed
in Australia
• Frequency:
The frequency available in the Channel group is displayed.
• bandwidth:
The available bandwidths are 7 MHz and 8 MHz.
5.
When it has finished, the number of scanned services will be displayed.
.
Press the
EXIT
button to exit.
You can input by pressing the button on the remote control.
Mode
: Custom
Equalizer
SRS TSXT
: Off
Auto Volume
: Off
Internal Mute
: Off
Reset
Move
Enter
Return
Auto Store
Scanning for digital services...
Services found: 24 Channel:
5%
Stop
Return
Channel
▲
65
▼
KHz
Frequency
bandwidth
MHz
Adjust Move
Return
Manual Store
Search
44000
BN68-01181A-X6_Eng-0321.indd 33