English - 69
Cable Network Setup
❑
Cable Network Setup-Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.
1.
Set
Network Type
to
Cable
.
2.
Select
Cable Network Setup
.
3.
Set
Internet Protocol Setup
to
Auto Setup
.
The Internet Protocol is set automatically.
N
4.
Select
Network Test
to check the network connectivity.
Cable Network Setup-Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).
Please check if the LAN cable is connected. (See page 65)
N
1.
Set
Network
Type
to
Cable
.
2.
Select
Cable Network Setup
.
3.
Set
Internet Protocol Setup
to
Manual Setup.
4.
Set up
IP Address
,
Subnet Mask
,
Gateway
and
DNS Server
.
Press the number buttons on the remote control when you set the Network manually.
N
5.
Select
Network Test
to check the network connectivity.
Wireless Network Setup
❑
Wireless Network Setup - Auto Setup
If you want to connect AP, AP should support DHCP.
Only devices which support Ad-hoc mode can be connected without DHCP.
1.
Set
Network Type
to
Wireless
.
2.
Select
Wireless Network Setup
.
3.
Set
Internet Protocol Setup
to
Auto Setup
.
The Internet Protocol is set automatically.
N
4.
Select a network through
Select a network
.
5.
Select
Network Test
to check the network connectivity.
Wireless Network Setup - Manual Setup
1.
Set
Network Type
to
Wireless
.
2.
Select
Wireless Network Setup
.
3.
Set
Internet Protocol Setup
to
Manual Setup
.
4.
Set up
IP Address
,
Subnet Mask
,
Gateway
and
DNS Server
.
Press the number buttons on the remote control when you set the Network manually.
N
5.
Select a network through
Select a network
.
6.
Select
Network Test
to check the network connectivity.
BN68-850_Eng.indb 69
2009-06-18 �� 3:56:05
