manualshive.com logo in svg

Samsung PN51D490A1DXZA, E-Manual

Share
Download
Samsung PN51D490A1DXZA E-Manual Download Page 220

▶ ◀

▶

English

Issues 

Solutions and Explanations

3D
The 3D Active Glasses are not 
working correctly.

 

•

Make sure the glasses are turned on.

 

•

The 3D Active Glasses may not work properly if there is any other 3D 
product or electronic device turned on near the glasses or TV.

 

•

If there is a problem, keep other electronic devices as far away as 
possible from the 3D Active Glasses.

The 3D images don’t look quite 
right.

 

•

The ideal viewing distance is three times or more the height of the 
screen.

 

•

We also recommend sitting with your eyes on a level with the screen.

The batteries in the 3D glasses 
don’t last.

 

•

Turn off 3D glasses while not using them. If you leave 3D glasses on, 
battery lifespan is shortened

Summary of Contents for PN51D490A1DXZA




















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands