22
English
Basic Features
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■
Audio Format
: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options
PCM
or
Dolby Digital
.
■
Audio Delay
: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
¦
Setting the Time
O
MENU
m
→
Setup
→
Time
→
ENTER
E
Time
■
Clock
: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
–
Auto
: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
–
Manual
: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set
: Set the
Month, Day, Year, Hour, Minute
and
am/pm
manually.
✎
Available only when
Clock Mode
is set to
Manual
.
✎
You can set the
Month
,
Day
,
Year
,
Hour
, and
Minute
directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On)
: Switches the
Daylight Saving Time function on or off.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
Time Zone
: Select your time zone.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
¦
Using the Sleep Timer
O
MENU
m
→
Setup
→
Time
→
Sleep Timer
→
ENTER
E
■
Sleep Timer
t
: Automatically
shuts off the TV after a preset period
of time (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel the
Sleep Timer
, select
Off
.
¦
Setting the On / Off Timer
O
MENU
m
→
Setup
→
Time
→
Timer 1
→
ENTER
E
You can set the TV to turn on automatically at a preset time.
■
Timer 1 / Timer 2 / Timer 3
: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time
: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to
Activate
.)
Volume
: Set the desired volume level.
Source
: Select
TV
or
USB
content to be played when
the TV is turned on automatically. (
USB
can be selected
only when a USB device is connected to the TV)
Antenna
(when the
Source
is set to
TV
): Select
Air
or
Cable
.
Channel
(when the
Source
is set to
TV
): Select the
desired channel.
SLEEP
20
TV
Cable
1
00
am
00
00
00
am
▲
▼
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
Source
Antenna
Channel
Repeat
L
Move
U
Adjust
E
Enter
R
Return
[PC675_ZA]BN68-03211A-00Eng.indb 22
2010-09-06 오전 9:32:03