- 4 -
✎
By connecting the TV to a receiver or home theater with
Dolby Digital
and 5.1ch speakers and selecting
Dolby
Digital
, you can maximize your interactive 3D sound
experience.
■
■
Audio Delay
: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select
Audio Delay
, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press
ENTER
E
when done (0ms ~ 250ms).
Speaker Settings
■
■
Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the TV’s speakers
and the speakers attached to your audio receiver. If this occurs, set
the TV to
External Speaker
.
✎
When you set
Speaker Select
to
External Speaker
, the
TV’s speakers are turned off. You will hear sound through the
external speakers only. When you set
Speaker Select
to
TV
Speaker
both the TV’s speakers and the external speakers
are on. You will hear sound through both.
✎
When
Speaker Select
is set to
External Speaker
, the
VOLUME
and
MUTE
buttons will not operate and the sound
settings will be limited.
✎
If there is no video signal, both the TV’s speakers and the
external speakers will be mute.
Sound Reset
■
■
Reset All
: Resets all sound settings to the factory defaults.
Channel Menu
❑
Memorizing Channels
When you first set up your TV using
Plug & Play
, the TV memorized
the channels that were available over the air or through your cable
system and added them to the
Channel List
. The
Antenna
and
Auto program
functions described below let you re-run the channel
memorization function without having to re-run the
Plug & Play
procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you
must select your TV's signal source,
Air
(using an antenna) or
Cable
.
Select Menu >
Channel
>
Antenna
>
Air
or
Cable
. After you have
selected the signal source, go on to the Auto Program function.
✎
Selecting the signal source using the
Antenna
function also
determines the signal source the TV is tuned to. For example,
if you receive your TV signal over the air, and you select
Cable
,
you will see only snow. You must select Air to see a picture.
Auto Program
The
Auto Program
function memorizes all channels that are
available over the air or through your cable system and adds them to
the
Channel List
.
To start
Auto Program
, follow these steps:
1. Push
MENU
m
→
Channel
→
ENTER
E
on your remote. The
Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV
signal.
Air
If your TV is connected to an antenna choose
Air
, and then press
ENTER
E
. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose
Cable
, and then
press
ENTER
E
.
Go to Step 3.
Auto
If you choose Auto, and then press
ENTER
E
, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the
◄/►/▲/▼
buttons to select
the type of digital and analog cable systems you have:
STD
,
HRC
,
or
IRC.
Most systems are
STD
(Standard). When done, select
Start
, and then press
ENTER
E
. The TV will start memorizing
channels.
✎
Channel memorization can take up to 45 minutes, depending
on your cable system.
✎
Memorized channels are added to the
Added Channel
list. These are the channels you will see when you use the
Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after
Auto Program
is
completed. This process may take up to 20~30 minutes.
✎
Press the
ENTER
E
button to stop the
Clear Scrambled
Channel
.
✎
This function is only available in
Cable
mode.
❑
Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the
All Channels, Added Channels
, or
Favorite
screen, pressing
the
▲
/
▼
buttons, and then pressing the
ENTER
E
button.
Added Channels
6
Air
6-1
♥ TV #6
7-1
♥ TV #7
8
Air
9
Air
9-1
♥ TV #9
10
Air
10-1
♥ TV #10
11-1
♥ TV #11
Air
'
Zoom
'
Select
T
Tools ► Next Program
Channel List Screens icons are listed on the left side. Select an
icon using the
▲/▼
buttons to view each list.
■
■
All Channels
: Shows all currently available channels including
those you deleted from the
Added channels
list.
■
■
Added Channels
: Shows all
Added channels
. These are the
channels that appear when you press the CH button.
■
■
*
Favorite
: Shows all favorite channels.
■
■
Programmed
: Shows all channels and programs currently
scheduled using
Timer Viewing
.
✎
Remote control buttons active on the
Channel List
screen.
x
Green (
Zoom
): Enlarges or shrinks a channel number.
x
Yellow (
Select
): Move the cursor to a channel. Press the Yellow
button to select the channel. A
c
mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
x
T
(
Tools
): Displays the
Channel List
Tools
menu. (The
Tools
menus may differ depending on the situation.)
