16
English
Basic Features
x
After selecting
Screen Fit
in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1.
Press the
◄
or
►
button to select
Position
.
2.
Press the
ENTER
E
button.
3.
Press the
▲
,
▼
,
◄
or
►
button to move the
picture.
4.
Press the
ENTER
E
button.
5.
Press the
◄
or
►
button to select
Reset
.
6.
Press the
ENTER
E
button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
■
Digital Noise Filter (Off / Low / Medium / High /
Auto)
: If the broadcast signal received by your TV is
weak, you can activate the
Digital Noise Filter
feature
to reduce any static and ghosting that may appear on
the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
■
HDMI Black Level (Normal / Low)
: Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode.
■
Film Mode (Off / Auto)
: Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■
Screen Burn Protection
: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
Pixel Shift (Off / On)
: Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.
✎
Optimum condition for pixel shift
Item
TV/AV/Component/
HDMI/PC
Horizontal
0~4
4
Vertical
0~4
4
Time (minute)
1~4 min
4 min
✎
The
Pixel Shift
value may differ depending on the
TV size (inches) and mode.
✎
This function is not available in the
Screen Fit
mode.
Scrolling
: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
✎
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
✎
Press any key on the remote control to cancel this
feature.
Side Gray (Dark / Light)
: When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Picture Reset (Reset Picture Mode /
Cancel)
Resets your current picture mode to its default settings.
Sound Menu
¦
Changing the Preset Sound Mode
O
MENU
m
→
Sound
→
Mode
→
ENTER
E
Mode
t
■
Standard
: Selects the normal sound
mode.
■
Music
: Emphasizes music over voices.
■
Movie
: Provides the best sound for
movies.
■
Clear Voice
: Emphasizes voices over
other sounds.
■
Custom
: Increase the intensity of
high-frequency sound to allow a better
listening experience for the hearing
impaired.
S.MODE
[PC430-mexico]BN68-02642A-02L02.indb 16
2010-02-11 오후 7:59:32
