71
Chapter 5. Menu
(HDMI-CEC)
(HDMI-CEC)
is a function that enables you to control all connected Samsung devices
that support with your Samsung product remote. The system can
be used only with Samsung devices that have the feature. To be sure your
Samsung device has this feature, check if there is an logo on it.
• You can only control devices using the product remote control, not the
buttons on the product.
• The product remote control may not work under certain conditions. If this occurs,
reselect the device.
•
works when the AV device supporting
is in the standby or on
status.
• While in
PIP
mode,
functions only when an AV device is connected as
the primary display. It does not work if the AV device is connected as a secondary
display.
•
supports up to 12 AV devices in total. Note that you can connect up to 3
devices of the same type.
Troubleshooting for
Problem
Possible Solution
does not
work.
• Check if the device is an device. The
system supports devices only.
• Check if the device power cord is properly
connected.
• Check the device’s Video/Audio/HDMI cable
connections.
• Check whether
(HDMI-CEC)
is set to
On
in the
System
menu.
• Check whether the remote control is
compatible.
• doesn’t work in certain situations. (initial
setup)
• If you have removed and then reconnected the HDMI
cable, please make sure to search devices again or turn
your product off and on again.
• Check if the function of the Anynet device is
set on.
I want to start
.
• Check if the device is properly connected to
the product and check if the
(HDMI-CEC)
is set
to
On
in the
System
menu.
I want to exit .
• Press the
SOURCE
button on the product remote control
and select a non- device.
The message
“Disconnecting
device ...”
appears on the screen.
• You cannot use the remote control when you are
configuring or switching to a view mode.
• Use the remote control after the product has
completed configuration or has finished
switching to .
