manualshive.com logo in svg

Samsung PG17N, Service Manual

Share
Download
Samsung PG17N Service Manual Download Page 7

3-1-1 Before making Disassembly

1. Disconnector signal cable and power cord

from the monitor.

2. With a pad beneath it, stand the monitor on its

front with the screen facing downward and
the base close to you.

3. Make sure nothing will damage the screen.

3-1-2 Cabinet Disassembly

1. With a pad beneath it, stand the monitor on its

front with the screen facing downward and
the base closest to you. Make sure nothing will
damage the screen.

2. Remove the Stand from the monitor.

(Refer to Stand manual)

3. Incline the monitor by lifting the rear of the

monitor.

4. Push the Opening jig each groove along the

top of the monitor till it makes a “ttak” sound.
(2 grooves : Left and Right, Make sure each
snap is disengaged.)

5. Squeeze the hold-snap on bottom of the

monitor using your hand.

6. Insert the Opening jig into the groove then

release the hold-snap.

PG17N*/PG19N*

3-1

3 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the
PG17N*/PG19N* monitors.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

3-1 Disassembly

Cautions:

1. Disconnect the monitor from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Figure 3

Figure 4

Figure 2

Figure 1

Summary of Contents for PG17N






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands