Samsung P1405J, Service Manual

Page: 9 / 24

6. Test Mode
• Driving Compartment Test
Pre-wash VALVE ON(0.3sec)
➔
OFF(0.3sec)
➔
COLD VALVE ON(0.3sec)
➔
[OFF(0.3sec)
➔
HOT VALVE ON (0.3sec) :
OPTION
]
➔
OFF(0.3sec)
➔
Rinse VALVE ON(0.3sec)
➔
OFF(0.3sec)
➔
Pump MOTOR ON(0.3sec)
➔
OFF(0.3sec)
➔
MOTOR Left (0.5sec)
➔
OFF(0.5 sec)
➔
MOTOR Right (0.5sec)
➔
OFF(0.3sec)
➔
HEATER RELAY ON(0.3sec)
➔
OFF(0.3sec)
➔
DOOR OPEN
(Function continues when door is closed)
2. THERMISTOR TEST MODE
A. Hold down “1” and “2” keys simultaneously and then press POWER S/W “4” on.
(Whole lamps turn on and display show “tl” after 3 Seconds.)
B. Press the “1” key and display shows “t2”
C. Press the “3” key and display shows the inside temperature of tub.
9 SAMSUNG ELECTRONICS CO., LTD
1. Driving Compartment Test Mode
A. Hold down “1” and “2” keys simultaneously and then press POWER S/W “4” on.
(Whole lamps turn on and display show “tl” after 3 Seconds.)
B. The driving compartment can be tested when you press “3” key right after entering
into the initial stage of the TEST MODE.
C
rpm
min.
1 2
3 4