Samsung OH46B User Manual Download Page 13

Page: 13 / 107

Parts

―

The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

POWER

Power LED / Remote sensor

Parts

Description

Remote sensor

Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.

―

Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.

Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.

―

Store used batteries out of reach of children and recycle.

―

Do not use a new and used battery together. Replace both batteries at the same time.

―

Remove batteries when the remote control is not to be used for an extended period of time.

Summary of Contents for OH46B












































































































Search results

Summary of Contents for OH46B

Reviews:

Related manuals for OH46B

Brands by name

Popular brands

Samsung OH46B, User Manual

Search results

Summary of Contents for OH46B

Reviews:

Related manuals for OH46B

Brands by name

Popular brands