Samsung OfficeServ User Manual Download

Page: 91 / 100

Retrieving CID Logs

Follow the steps below to retrieve CID logs.

Select the [CID Log] menu from the [Run] to see the <CID Log> window.

Enter the start time and end time for retrieving logs and DID No./Name.

Click [Run] to see the log retrieval results for the DID No. or DID name within the time

period.

Retrieving Logs for Each Transfer Destination

Follow the steps below to retrieve logs for each transfer destination.

Select the <Transferred Destination Log> menu from the [Run] to see the <Transferred

Destination Log> window.

Enter the start time and end time for retrieving logs and the transfer destination number

to be retrieved.

Click [Run] to see the log retrieval results for the transfer destination number within the

time period.

Table of Contents

Home Page

Summary of Contents for OfficeServ





































































































Search results

Summary of Contents for OfficeServ

Reviews:

Related manuals for OfficeServ

Brands by name

Popular brands

Samsung OfficeServ, User Manual

Search results

Summary of Contents for OfficeServ

Reviews:

Related manuals for OfficeServ

Brands by name

Popular brands