8
•
Lift the handset or press the
SPK
or
MONITOR
key.
•
Dial the tie line access code or press the tie line key.
•
When you receive dial tone from the other system, you can dial extension
numbers or access outside lines. You must know the extension numbers
and the line access codes for the other system.
•
Finish the call by replacing the handset or pressing the
ANS/RLS
or the
MONITOR
key if you are using a 7 button phone.
NOTE: Outgoing calls are controlled by the station’s dialing class.
INCOMING
Station users in the other system can access the tie line and make intercom calls
to stations in your system. Answer tie line calls ringing at your station as you would
any other outside call.They can be put on hold, transferred and conferenced in the
same manner as are other outside calls.
IN AND OUT ON TIE LINE
Users accessing the tie line from the other system can get a line in your system and
make outgoing calls. These calls can be controlled by assigning a dialing class to
the tie line. For further information, see your service company.
CALLER ID
SPECIAL FEATURES
NOTE: The Caller ID features below require optional software and/or hard-
ware. Please ask your installation and service company for details.
ABANDON CALL LIST
The system has a system-wide abandoned calls list that stores CID information for
the last
100
calls on the
OfficeServ 7200
,
iDCS 500 Release 2 M and L
version
and
50
calls on the
iDCS 100 Release 2
that rang but were not answered and
were accompanied with valid CID information. Calls with CID information consist-
ing of OUT OF AREA, PAYPHONE or PRIVATE will not be stored in the list. The aban-
doned calls list is accessed using the system administrator’s passcode. When re-
viewing this list, you are provided options to
CLEAR
the entry or
DIAL
the num-
ber. You can use the
NND
key to toggle between the CID name, CID number and
the date and time the call came in. The system must be using LCR to dial numbers
from the abandoned calls list.
To view the list of abandoned incoming calls for which CID information has been
received:
•
Dial
64
and dial the system administrator passcode.
•
Scroll through the entries using the
VOL
keys.
CID ON SMDR
The Station Message Detail Records (SMDR) report can be set to include the CID
name and number for incoming calls. This format expands the printout to 113
characters.You must use a wide carriage printer or an 80 column printer set to the
condensed print option.
NUMBER TO NAME TRANSLATION
The system provides a translation table of
1000
entries in the
OfficeServ 7200
,
iDCS 500 Release 2 M
, and
2000
entries in the
iDCS 500 Release 2 L
and
500
entries on the
iDCS 100 Release 2
for use in areas that do not provide name and
number (sometimes called “deluxe”) Caller ID or when ANI is received. When the
CID or ANI number is received, the table is searched. When a match is found, the
system will display the corresponding name from the table.This will allow users in
areas that do not support “deluxe” Caller ID or have only ANI service to provide
names for callers.
9
Home Page
System Admin
Table of Contents
