cabinets. Each port on this card is intended for connection to one telephone. Connecting multiple telephones to
a port may result in incorrect operation or damage to the card. This card supports Power Fail Transfer feature.
See
the installation manual for details.
The OfficeServ 7100 supports Caller ID to single line telephones.The 8SLI is not
hot swappable.
16MWSLI
This card is a sixteen circuit analog station interface for industry standard single line telephones that require oper-
ation of an industry standard message waiting lamp with a voltage range of 85 ~ 96 VDC. The lamp can be pro-
grammed to be on continuously or flash at a programmable rate of 100ms to 2000ms ON/OFF times. The
16MWSLI does not contain any over-voltage protection and is not qualified as OPX. It also does not contain DTMF
receivers, but instead shares the system DSP resources. It can be inserted in any universal card slot in all cabinets.
Each port on this card is intended for connection to one telephone. Connecting multiple telephones to a port
may result in incorrect operation or damage to the card. This card supports the Power Fail Transfer feature.
installation manual for details.
The OfficeServ 7100 supports Caller ID to single line telephones. The 16MWSLI is
not hot swappable.
8COMBO2
This card has a combination of eight dedicated digital stations ports (1B+D) for Samsung Digital Keysets and
eight dedicated analog station ports for industry standard single line telephones or other analog devices. This
card installs in any universal slot in any cabinet. The OfficeServ 7100 supports Caller ID to single line telephones.
The 8COMBO2 is not hot swappable.
HARDWARE CAPACITIES
FIGURE 2-3
2.5
Interface Card
Location
Maximum per System
UNI Card
Slots 1 & 2
2
4SWM
MP10a only
1
4DLM
UNI card & MP10a
6
4SLM
UNI card
6
4TRM
UNI card
5
8TRK2
Slots 1 & 2
2
16TRK
Slots 1 & 2
2
8COMBO2
Slots 1 & 2
1
8SLI2
Slots 1 & 2
2
8DLI2
Slots 1 & 2
2
16DLI2
Slots 1 & 2
1
16MWSLI
Slots 1 & 2
1
TEPRIa
Slots 1 & 2
1
MGI16
Slots 1 & 2
1
Home Page
Table of Contents