Samsung NZ84F7NC Series, User Manual

Page: 188 / 220

English - 12
CoNNeCtING to tHe MAINS PoWeR SUPPLY
Before connecting, check that the nominal voltage of the appliance,
that is, the voltage stated on the rating plate, corresponds to the
available supply voltage. The rating plate is located on the lower
casing of the hob.
Shut off power to circuit before connecting wires to
circuit.
The heating element voltage is AC 230 V~. The appliance also
works perfectly on networks with AC 220 V~ or AC 240 V~.
The hob is to be connected to the mains using a device that
allows the appliance to be disconnected from the mains at
all poles with a contact opening width of at least 3 mm, eg.
automatic line protecting cut - out, earth leakage trips or fuse.
The cable connections must be made in accordance with
regulations and the terminal screws tightened securely.
Once the hob is connected to the mains supply, check that all
cooking zones are ready for use by briefly switching each on
in turn at the maximum setting with suitable cookware.
When the hob is powered on for the first time, all displays light
and the child safety lock is activated.
Pay attention (conformity) to phase and neutral allocation
of house connection and appliance (connection schemes);
otherwise, components can be damaged.
Warranty does not cover damage resulting from improper
installation.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
WARNING
WARNING
WARNING
WARNING
WARNING
NZ84F7NC6AB_EE_DG68-00512A-04_EN.indd 12 2018-04-27 10:32:15