background image

English  5

Saf
ety ins

truc

tions

CAUTION

Be sure the appliance is properly installed and grounded by a 
qualified technician.
The appliance should be serviced only by qualified service 
personnel. Repairs carried out by unqualified individuals may 
cause injury or serious malfunction. If your appliance is in need 
of repair, contact your local service centre. Failure to follow 
these instructions may result in damage and void the warranty.
Flush - mounted appliances may be operated only after they 
have been installed in cabinets and workplaces that conform 
to the relevant standards. This ensures sufficient protection 
against contact for electrical units as required by the essential 
safety standards.
If your appliance malfunctions or if fractures, cracks or splits 
appear:

• 

switch off all cooking zones;

• 

disconnect the hob from the mains supply; and

• 

contact your local service centre.

If the hob cracks, turn the appliance off to avoid the possibility 
of electric shock. Do not use your hob until the glass surface 
has been replaced.

The surfaces are liable to get hot during use.
This appliance can be used by children aged from 8 years and 
above and persons with reduced physical, sensory or mental 
capabilities or lack of experience and knowledge if they have 
been given supervision or instruction concerning use of the 
appliance in a safe way and understand the hazards involved. 
Children shall not play with the appliance. Cleaning and user 
maintenance shall not be made by children unless they are 
older than 8 and supervised. 
Keep the appliance and its cord out of reach of children less 
than 8 years.

Summary of Contents for NZ64B6056 Series































Reviews: