Samsung NZ36M9880 Series, Installation Manual

Page: 8 / 36

8 English
Installation instructions
Installation instructions
STEP 3-1 Bracket Guide Installing -Main
The bracket Guide can be installed after cooktop is placed into the cutout.
Bottom of Cooktop
M4 L10
screw
M4 L16 screw
1. Attach bracket guide to bottom of
cooktop and side of wall.
2.
Adjust to match hole of bracket and
bottom of cooktop.
3. Tighten screw enough to hold bracket in
place when cooktop is placed in cutout.
4. Using 2 or more people, turn the
cooktop right side up and place in
cutout.
NOTE
Make sure that the front edge of the
cooktop is parallel to the front edge of the
countertop. If repositioning is needed, lift
entire cooktop up from cutout to avoid
scratching the countertop.
STEP 3-2
Alternative Bracket Guide Installing
Countertop
Cooktop
UNC 24
3
/
16
L75 screw
M4 X L10
screw
1. Attach bracket guide to bottom and
select bracket location.
2.
Tighten screw bracket guide to base of
cooktop.
3. Install UNC 24
3
/
16
L75 screw until it
touches the bottom of the countertop.
Turn the thumbscrew until bracket touches
the bottom of the countertop. Do not over
tighten.
Installation instructions
Install cooktop
STEP 1
Prepare installation
Decide on the final location for the cooktop. Avoid drilling or cutting into house
wiring during installation.
Foam Tape
Bottom of Cooktop
Cooktop Glass
01 Using 2 or more people, place the
cooktop upside down on a covered
surface using the foam end posts from
the packaging.
02 The foam strip helps avoid damage to
the underside of the cooktop glass from
debris and helps the cooktop sit flat on
uneven counters.
STEP 2 Place cooktop
Cooktop
Insert the cooktop centerd into the cutout
opening. Make sure the cooktop is parallel
to the front edge of the countertop. Make
final check that all required clearances are
met.
CHEF-INDU_NZ30M9880_NZ36M9880_DG68-00827B-01_EN+MES+CFR.indb 8 5/25/2018 7:07:52 PM