English 53
Tr
ouble
shoo
ting
Problem
Cause
Action
Food does not
bake or roast
properly in the
oven.
The wrong cooking mode
is selected.
See page
The oven racks have not
been positioned properly
for the foods being
cooked.
See page
Incorrect cookware or
cookware of improper
size is being used.
See page
The oven thermostat
needs adjustment.
See page
There is aluminum foil on
racks or oven bottom.
Remove foil.
The clock or timers are
not set correctly.
See page
Food does not
broil properly in
the oven.
The oven controls are not
set properly.
See page
The oven door was not
closed during broiling.
See page
The rack has not been
properly positioned.
See the broiling guide on page
Information codes
Code symbol
Meaning
Solution
Oven sensor malfunction.
1.
Tap
OFF
, and then restart the
oven.
2.
If the problem persists, disconnect
all power to the oven range for
at least 30 seconds and then
reconnect the power.
The oven is overheating.
Check the Control PBA NTC Sensor.
Temp probe malfunction.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Oven vent blocked.
1.
If oven vent or cover air is
blocked by aluminum foil
or others, remove that and
restart oven.
2.
To reset error, disconnect
power or tap '
OFF
' after
opening the oven door at
least 60 seconds.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
NX60BB8715QNAP_AP_DG68-01493A-01.indb 53
NX60BB8715QNAP_AP_DG68-01493A-01.indb 53
2023-01-20 오전 11:17:52
2023-01-20 오전 11:17:52
