manualshive.com logo in svg

Samsung NX58M6630SS/AA-00, User Manual, Page: 40 / 52

Share
Download
Samsung NX58M6630SS/AA-00 User Manual Download Page 40

40  English

Maint

enanc

e

Maintenance

To delay starting the self-cleaning cycle

02

03

04

1. 

Repeat steps 1 and 2 on the previous page.

2. 

Press the 

Delay Start

 pad. The oven door locks.

3. 

Set the time you want the oven to start self-cleaning using the number pad.

4. 

Press the 

START/SET

 pad. The oven will start self-cleaning at your specified 

time.

To cancel the self-cleaning cycle

You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke 
in the oven. To turn off the self-cleaning cycle, press the 

OVEN OFF

 pad. The cycle 

turns off, but the door remains locked and the Lock icon blinks until the oven 
temperature falls below 400 °F (204 °C).

After self-cleaning
• 

The door stays locked until the internal oven temperature falls below 400 °F.

• 

When the oven has cooled down, wipe the oven surfaces with a cloth to remove 
ash residue.

• 

Stubborn stains can be removed using a steel-wool pad. Lime deposits can be 
removed using a vinegar-soaking cloth.

• 

If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears 
on the display until the oven cools down. Wait until the message disappears, and 
then start a new cycle.

• 

The cooling fan automatically runs for certain amount of time after self-cleaning.

• 

Self-cleaning does not operate within 2 hours after running the self-cleaning cycle.

CAUTION

Do not attempt to open the oven door immediately after the self-cleaning cycle is 
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or 
steam could burn you.

How to run a self-cleaning cycle

Make sure the door lock is released. Remove all racks from the oven cavity.

03

02

1. 

Make sure the oven door is unlocked and closed completely.

2. 

Press the 

Self Clean

 pad once. Then, select the cleaning time by pressing the 

Self Clean

 pad one or more times in accordance with the table below.

Once

Twice

Three times

3 hour

5 hour

2 hour

3. 

Press the 

START/SET

 pad. The oven door is locked and the oven begins to heat 

up.

4. 

When the cycle is complete, the oven beeps 6 times. The door will remain 
locked and the Lock icon will blink until the oven temperature falls below 
400 °F (204 °C).

5. 

When the Lock icon changes to an open lock, you can open the oven door. The 
Lock icon changes to an open lock when the oven temperature drops below 
400 °F (204 °C).

6. 

Press the 

OVEN OFF

 pad to display the time of day.

CAUTION

Do not use the surface burners while the gas oven is performing a self-cleaning 
cycle.

WARNING

Be sure all controls are OFF and all surfaces are COOL before cleaning any part of 
the range.

NOTE

Make sure all surface burners are off while the oven is performing a self cleaning 
cycle. Self-clean will not operate if a surface burner is on.

NX5000M_NX58M6650WS_AA_DG68-00993A-03_EN+MES+CFR.indb   40

2018-08-29     5:12:51

Summary of Contents for NX58M6630SS/AA-00





















































Reviews:

No comments