Samsung NX58K7850S SERIES, Installation Manual

Page: 25 / 84

English 25
Ins
tallation ins
truc
tions
Adjusting the oven burner air adjustment shutters
Air
adjustment
shutter
All oven burners have an air adjustment
shutter. The purpose of the shutter is to
regulate the flow of air to the flames.
Properly adjusted flames should burn
steadily with approximately 1-in of blue
cone. The flames should never extend
past the edge of the burner baffles. Even
though these are preset at the factory, they
should be checked and, if needed, adjusted
periodically to ensure efficient operation.
To check and adjust the oven burner air adjustment shutters:
1.
Open the oven door.
2. Remove the oven racks.
3. Remove the oven floor.
4. Press the Bake pad, then the START pad.
5.
After the oven has lit, visually check the flames coming out of the upper and
lower burners. If adjustment is needed, carefully adjust the air adjustment
shutters.
Step 9. Final installation checklist
You have just completed installing your range. Make sure all controls are in the off
position and the flow of ventilation air to the range is unobstructed. The following
is a checklist to confirm your range is safely installed and ready for operation.
Gas Range Plug
Locking screw
• Gas line has been properly connected
to the range. The gas has been turned
on. All connections have been checked
for leaks.
• Range is plugged into the properly
grounded electrical receptacle.
• Approved anti-tip bracket is properly
installed and engaged with the range.
• Range is leveled and is firmly sitting on
a solid, level floor.
• Gas surface burners have been properly
assembled.
• All burners have been tested for proper
operation.
• FOR INSTALLER ONLY—Check and/or
adjust the broil and oven burner flames
as described on page 35-36 in this
manual.