English 9
Impor
tant saf
ety inf
ormation
LOCATION SAFETY
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or
death, obey the following precautions.
•
This range is for indoor, household use
only.
Do not install
the range in areas
exposed to the weather and/or water.
• Do not install
the range in a place
which is exposed to a strong draft.
•
Select a level, well-constructed floor that can support the range’s
weight. Synthetic flooring, such as linoleum, must withstand 180
°F (82 °C) temperatures without shrinking, warping, or discoloring.
Do not install
the range directly over interior kitchen carpeting
unless a sheet of ¼ inch plywood or a similar insulator is placed
between the range and carpeting.
•
Select a location where a grounded, 3- prong outlet is easily
accessible.
•
If the range is located near a window,
do not hang
long curtains
or paper blinds on that window.
• Remove
all accessories from the cooktop, oven, and/or lower
drawer. Grates and griddles are heavy. Use caution when handling
them.
• Make sure
no parts came loose during shipping.
• Make sure
your range is correctly installed and adjusted by
a qualified service technician or installer for the type of gas
(natural or LP) you will use. For your range to utilize LP gas, the
installer must replace the 5 surface burner orifices and 2 oven
orifices with the provided LP orifice set, and reverse the GPR
adapter. These adjustments must be made by a qualified service
technician in accordance with the manufacturer’s instructions and
all codes and requirements of the authority having jurisdiction.
The qualified agency performing this work assumes the gas
conversion responsibility.
•
Installation of this range must conform with local codes or, in
the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must
conform with the current Natural Gas Installation Code, CAN/
CGA-B149.1, or the current Propane Installation Code, CAN/
CGA-B149.2, and with local codes where applicable. This range
has been design-certified by ETL according to ANSI Z21.1, latest
edition, and Canadian Gas Association according to CAN/CGA-1.1,
latest edition.
