Samsung NX58H9500W Series, User Manual

Page: 25 / 216

English - 25
04 GAS R
ANGE
Ignition
1
2
Make sure all surface burners are properly
installed.
1.
Push in and turn the control knob to the
LITE
position. You will hear a "clicking" sound
indicating the electronic ignition system is
working properly.
2.
After the surface burner lights, turn the
control knob to shift it out of the
LITE
position and turn off the electronic ignition
system.
3.
Turn the control knob to adjust the flame
level.
Manual ignition
You can ignite the burner manually in case of a power failure. Use caution when doing this.
1.
Hold a long gas grill lighter to the surface burner you want to light.
2.
Push in and turn the control knob for that burner to the
LITE
position. Turn on the grill lighter to
ignite the burner.
3.
After the burner is lit, turn the control knob to adjust the flame level.
Flame level
The flames on the burners should always stay under the cookware, and should not extend beyond
the cookware bottom at any time.
WARNING
• Flames larger than the cookware bottom may result in a fire or physical injury.
• When you set a burner to simmer, do not turn the burner knob quickly. Watch the flame to
make sure it stays on.
• After turning on a surface burner, check to make sure that the burner has ignited. Adjust
the level of the flame by turning the burner knob.
• Always turn off the surface burner controls before removing cookware. All surface burner
controls should be turned OFF when you are not cooking.
• Always turn the burners off before you go to sleep or go out.
• If you smell gas, turn off the gas to the range and call a qualified service technician. NEVER
use an open flame to locate a leak.