66
_ maintaining your appliance
cooktop surface
The cooktop surface is a porcelain-enamel surface. To prevent this surface from
becoming dull, wipe up and clean spills as they happen. Foods with a lot of acid
(tomatoes, sauerkraut, fruit juices, etc.) or foods with high sugar content can
cause dull spots if allowed to set.
Do not use a steel-wool pad or abrasive cleaners on porcelain-enamel
surfaces. Abrasive pads and cleaners will scratch and damage the surface.
1.
Make sure all surface burners are OFF.
2.
When surfaces have cooled, remove the
burner grates.
Do not remove or lift the cooktop
during cleaning. Doing so could
damage the gas lines leading to the
surface burner manifolds, causing poor
and/or dangerous operation.
3.
Clean the cooktop surface with warm, soapy water and a soft, damp cloth. If
spill goes under a surface burner, remove the surface burner cap and head to
access and clean the spill.
4.
Rinse with clean water and dry and polish with a soft, dry cloth.
5.
Reassemble burner components (if removed) and replace the burner grates.
WARNING
WARNING
User manual NX58H5 Series_DG68-00CFR.indb 66
08/02/2014 12:02:33
