Samsung NX-6B Operating Manual Download Page 24

Page: 24 / 64

You may conference up to five parties in any
combination of outside lines and internal stations,
in any order.

To Set Up A Conference

Keyphone

1. While engaged in a conversation, press

[TRANSFER]

and dial

[4][6]

Or, press

[CONF]

button.

¡¤

You hear a transfer tone.

2. Make another call to either an intercom station or

outside party, then press

[TRANSFER]

Or, press

[CONF]

to add this party.

¡¤

Be sure the party answers your call.

3. Repeat Step 2 until all parties are added.

Standard phone

1. While engaged in a conversation, hookflash

and dial

[4][6]

¡¤

You hear a transfer tone.

2. Make another call to either an intercom station or

outside party, and then hookflash and you will
receive a

transfer

tone.

3. Repeat Step2 until all parties are added.

CALL PROCESSING

Conference Calls

Summary of Contents for NX-6B

































































Search results

Summary of Contents for NX-6B

Reviews:

Related manuals for NX-6B

Brands by name

Popular brands

Samsung NX-6B, Operating Manual

Search results

Summary of Contents for NX-6B

Reviews:

Related manuals for NX-6B

Brands by name

Popular brands