10 English
Be
for
e y
ou s
tar
t
After installation is complete, remove the protective film, tape, and other packing
material, and take out the provided accessories from inside the oven. To remove
the oven from the cabinet, first disconnect power to the oven and remove
2 screws on both sides of the oven.
WARNING
The oven requires ventilation for normal operation. Do not block the vents under
any circumstance.
NOTE
The actual appearance of the oven may differ with the model.
Before you start
Initial settings
When you power on the oven for the first time, the default time of “12:00” appears
on the display where the hour element (“12”) blinks. Follow the steps below to set
the current time.
1.
With the hour element blinking, turn the
value dial (right-sided dial) to set the
hour, and then press
OK
to move to the
minute element.
2.
With the minute element blinking, turn
the value dial to set the minute, and
then press
OK
.
To change the current time after this initial
setting, hold down the
button for
3 seconds and follow the above steps.
Installation
NV75N5641RS_EU_DG68-01057C-03_EN+DE.indb 10
2018-02-09 8:43:03
