《
79
》
Software Notes
System Requirements
About the software
Please ensure that you read the software instructions carefully before use.
·
The attached software is a camera driver and image editing software tool for Windows.
·
Under no circumstances should all or part of either the software or the user manual be
reproduced.
·
Copyrights for software are licensed only for use with a camera.
·
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
·
Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
·
Before reading these instructions, you should have a basic knowledge of computers
and O/S (Operating Systems).
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
※
Screen Captures illustrated on this
manual is based on English Edition of
Windows.
For Windows
For Macintosh
PC with processor better than Pentium II
450MHz (Pentium 700MHz recommended)
Windows 98/98SE/2000/ME/XP
Minimum 128MB RAM
200MB of available hard disk space
1024x768 pixels, 16-bit colour
display compatible monitor
(24-bit colour display recommended)
DirectX 9.0 or late
Digimax Converter
PC with processor better than Pentium III 500MHz
(Pentium
Ⅳ
recommended)
Windows 98SE/2000/ME/XP
(Windows 2000/XP recommended)
For playing back a movie clip
Mac OS 10.1~10.4
MPlayer, VLC Media Player
Power Mac G3 or later
Mac OS 9.0 ~ 10.4
Minimum 64MB RAM
110MB of available hard-disk space
QuickTime player or a media player
that supports AVI file format.
■
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver for
MAC is not included with the Application CD. You can use the camera with Mac
OS 9.0 ~ 10.4.
■
■
XviD codec : This makes movie clips (MPEG-4) recorded with this camera
play back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
■
Digimax Converter : Multimedia converting program
Multimedia (Movie, Video clip, etc) files can be converted into movie clips that
can be played back on this camera. This software is only compatible with
Windows.
