E-
20
Setting the On Timer
The On Timer enables you to turn on the air conditioner automatically at the
appointed time within a range of 30 minutes to 24 hours.
1
Press
button.
Result:
is blinking on the remote control display.
2
Press button to set until the desired time is displayed.
Result:
Time is adjusted for 30 minutes or 1-hour increments pressing
button within a range of 30 minutes to 24 hours.
3
Press
button to complete setting.
Result:
Blinking
stops and remaining time is displayed.
If you don’t press button in 10 seconds, setting will be
canceled.
To cancel the set, press
again.
4
Press button until the desired mode appears on the remote control
display.
Result:
The air conditioner runs in the selected mode when it is
turned on.
Whenever pressing button,
Auto
Cool
Dry
Fan
Heat
is selected repeatedly.
5
To adjust the temperature, press button to set the desired tem-
perature.
Result:
Press button until the desired temperature appears
on the remote control display.
Adjusting temperature is in Auto, Cool, Dry and Heat mode.
Summary of Contents for NS***NDXEA
Page 1: ......
