Basics
27
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
On the desktop, right-click the Start button (
) and select
Control Panel
ĺ
Network and Internet
ĺ
Network and
Sharing Center
ĺ
Change adapter settings
.
2
Right-click
Ethernet
and select
Properties
.
3
Select
Configure…
ĺ
Power Management
ĺ
Allow this
device to wake the computer
ĺ
OK
.
4
Restart the computer.
r
If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
r
This feature may not work while using other power saving
features. To disable other sleep functions, right-click the
Start button (
) and select
Control Panel
ĺ
Hardware
and Sound
ĺ
Power Options
.
5
Configure the IP settings.
r
When using DHCP, select
Obtain an IP address
automatically
.
r
When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select
Use the
following IP address
and set the IP address manually.
6
Select
OK
to save the settings.