background image

24

Chapter 1 

Getting Started

Proper Posture During Computer Use

Volume Control (Headphones and Speakers)

Check your volume first to listen to music.

Check your  

volume!

Check if the volume is too loud before using headphones.

 

It is not recommended using headphones for long periods of 

 

time.
Any deviation from the equalizer default setting could cause 

 

hearing impairment.
The default setting can be changed through software and 

 

driver updates without your intervention. Please check the 

equalizer default setting before first usage.

Use Time (Break Time)

Take a break for 10 minutes or more after a 50-minute period 

 

when working for more than one hour.

Illumination

Do not use the computer in dark locations. The illumination 

 

level for computer use must be as bright so for reading a book.
Indirect illumination is recommended. Use a curtain to prevent 

 

reflection on the LCD screen.

Operation Condition

Do not use the computer in hot and humid locations.

 

Use the computer within the allowed temperature and 

 

humidity range specified in the User Guide.

Summary of Contents for NP600B4C
















































































































































Reviews: