Samsung NP540U4E Page 65 User Manual Download

Page: 65 / 150

Chapter 3.

Using the computer

Connecting through the HDMI port (Optional)

By connecting the computer to a TV with a HDMI port, you can

enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to configure the

screen and sound.

Connect the HDMI cable to the HDMI port of the TV.

External

Monitor

Projector

This is only supported for models that support a TV output

•

port (HDMI).
When a TV provides more than one HDMI port, connect

•

the computer to the

DVI IN

port.

When connecting the computer to a TV, switch the

•

external input mode of the TV to

HDMI

Select

Charms menu > Devices

검색

시작

장치

설정

> Second Screen

Select a desired monitor mode.

3&୘ִփ

ـࢿ

୙ࢠ

ѿءध୘ִփ

PC screen only

The contents are only displayed on the PC

monitor (current device).

3&୘ִփ

ـࢿ

୙ࢠ

ѿءध୘ִփ

Duplicate

The contents of the current device are displayed

on the external device as well.

3&୘ִփ

ـࢿ

୙ࢠ

ѿءध୘ִփ

Extend

The screen of the current device is expanded to

the external device.

3&୘ִփ

ـࢿ

୙ࢠ

ѿءध୘ִփ

Second screen only

The contents are displayed only on the screen of

the external device.

External Monitor / TV is not supported in the DOS

•

Command Prompt window.
Simultaneous output to all 3 (LCD + CRT + HDMI) is not

•

supported.

Connecting an External Display Device

(Optional)

Summary of Contents for NP540U4E























































































































































Search results

Summary of Contents for NP540U4E

Reviews:

Related manuals for NP540U4E

Brands by name

Popular brands

Samsung NP540U4E, User Manual

Search results

Summary of Contents for NP540U4E

Reviews:

Related manuals for NP540U4E

Brands by name

Popular brands