manualshive.com logo in svg

Samsung NP35, User Manual

Share
Download
Samsung NP35 User Manual Download Page 180

3-6

Manual

4. Select, drag and drop folders or files to copy onto the CD-ROM drive window.

Click Write Files to CD in the CD-ROM drive window.

5. When the CD Write Wizard appears, enter the CD label, and click Next. 

The data will begin copying.

6. When copying is completed, a ‘completed’ message will appear and the 

CD-ROM drive will open automatically. 

CD-ROM drive window

2. Click Write Files to CD

1. Drag and drop folders or files to copy

My Computer window

For more information on copying CDs
Click Start > Help and Support. Enter [CD copy] in the search field, and click the
Search button.

For more information on creating an audio CD
Run the Windows Media Player, click the Help menu, and select [Using Windows
Media Player > Using CDs > Creating your own CDs > To create your own CD].

N

N

o

o

t

t

e

e

 

 

Summary of Contents for NP35






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands