Samsung NP300E5E User Manual Download

Page: 135 / 140

134

Chapter 6

Appendix

Product Specifications

Registered Trademarks

Samsung is a registered trademark of Samsung Co., Ltd.
Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of

the Intel Corporation.
AMD, Dual-Core/Quad-Core are registered trademarks of the AMD

Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the

Microsoft Corporation.
The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.
All other product or company names mentioned herein are

registered trademarks of their respective companies.

ENERGY STAR® Partner

As an ENERGY STAR® Partner, SAMSUNG has

determined that this product meets the ENERGY STAR®

guidelines for energy efficiency.

HDMI

Summary of Contents for NP300E5E













































































































































Search results

Summary of Contents for NP300E5E

Reviews:

Related manuals for NP300E5E

Brands by name

Popular brands

Samsung NP300E5E, User Manual

Search results

Summary of Contents for NP300E5E

Reviews:

Related manuals for NP300E5E

Brands by name

Popular brands