Samsung NP270E5E-K01US User Manual Download

Page: 28 / 133

Chapter 1

Getting Started

Turning the Computer On and Off

Turning the computer on

Connect the

AC adapter

Lift the LCD panel up.

Press the

Power button

to turn the computer on.

If the power is turned on, the

power LED

is lit.

About Windows Activation

When you turn the computer on for the first time, the Windows

activation screen appears.
Follow the activation procedures according to the instructions on

the screen to use the computer.

Adjusting the screen brightness

When the computer runs on battery power, the LCD brightness is

automatically set to low.

Press the

key combination to increase the screen

brightness.

Open the

Charms

•

Touchpad/mouse:

Drag the mouse pointer to the top- or

the bottom-right corner of the screen.

Increase the bar by pressing the

Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

Brightness

⦽

Summary of Contents for NP270E5E-K01US






































































































































Search results

Summary of Contents for NP270E5E-K01US

Reviews:

Related manuals for NP270E5E-K01US

Brands by name

Popular brands

Samsung NP270E5E-K01US, User Manual

Search results

Summary of Contents for NP270E5E-K01US

Reviews:

Related manuals for NP270E5E-K01US

Brands by name

Popular brands