Using the Flex-Bay 43
Swapping a Flex-Bay Device - Power Off
To remove a device with the power off proceed as follows:
1.
Turn the computer’s power off.
2.
Tilt the computer up and locate the flex-bay latch.
3.
Slide and hold the latch toward the rear of the computer.
4.
Slide the device out.
5.
Carefully slide the new device into the bay.
6.
Push the device in until it is flush with the chassis and the flex-bay latch snaps into
place. Your computer’s operating system automatically recognizes the device in
the flex-bay and configures your computer accordingly when power is restored.
Swapping a Flex-Bay Device - Power On
You are recommended to turn the system off before swapping devices, but you can use
the Softex Bay Manager utility to swap devices in the flex-bay while the power is on.
To start the Softex Bay Manager utility:
1.
Click
Start
>
Control Panel > Other Control Panel Options > Softex Bay
Manager
.
- or -
2.
Double-click the SwapBay icon
in the Windows taskbar.
