Samsung NP-X65 User Manual Download

Page: 129 / 195

128

Controlling the Brightness Using the Keyboard

Adjust the LCD brightness by pressing the

+ (

) key or the

+ (

) key.

The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the

+ (

) key

once.

Note

■

Maintaining the changed LCD brightness even after turning the computer on again

To maintain the LCD brightness set by using the brightness control keys or through the Power Options, follow the

procedures below.
1. Turn the computer on and press the

key when the SAMSUNG logo appears on the screen to enter the BIOS Setup.

2. Select the

Boot

menu and set the

Brightness Mode Control

item to

User Control

3. Press the

F10

key to save the settings and exit Setup.

■

Saving battery power consumption

Decrease the LCD brightness when the computer is running on battery power or select

Samsung Optimized

in Easy

Battery Manager to save battery power consumption.

■

Defective LCD Pixels

An LCD panel may include less than 10 defective pixels due to a limit in the manufacturing process and this does not affect

the computer performance. The computer’s LCD panel may have the same or similar number of defective pixels as other

manufacturer’s notebook computers.

Caution

Instructions for Cleaning the LCD

Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction.

Cleaning the LCD panel with excessive force can damage the LCD.

LCD Brightness Control

You can adjust the LCD brightness in 8 levels.

Before You Start!

The LCD brightness is the brightest (Level 8) when the computer is running on AC power, and it becomes dimmer when running on

battery power.

Summary of Contents for NP-X65




































































































































































































Search results

Summary of Contents for NP-X65

Reviews:

Related manuals for NP-X65

Brands by name

Popular brands

Samsung NP-X65, User Manual

Search results

Summary of Contents for NP-X65

Reviews:

Related manuals for NP-X65

Brands by name

Popular brands