Samsung NP-R620E User Manual Download

Page: 152 / 208

Shutdown the system, close the LCD panel and

place the computer upside down on a flat surface.

Pull the two battery latches outwards (

), then

remove the battery.

To install the battery again, slide the battery into the

system.

The battery latches move inwards and fix the battery
automatically.

Note

Check if the battery latch has been moved inwards.

Installing/Removing the Battery

Battery

Please refer to the following instructions when running the computer on battery power without connecting the AC

power.

A Lithium-Ion smart battery is supplied with this computer.

Before You Start!

Carefully read and follow the precautions printed on the battery before using the battery.

Caution

Precautions

Use only chargers specified in the User Manual.
Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.

Never cause a short circuit between the battery pack terminals or disassemble the battery pack.

Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the

battery.

Please refer to the system operation environment ( p. 194) of this manual and operate and store the battery at room

temperature.

Summary of Contents for NP-R620E

















































































































































































































Search results

Summary of Contents for NP-R620E

Reviews:

Related manuals for NP-R620E

Brands by name

Popular brands

Samsung NP-R620E, User Manual

Search results

Summary of Contents for NP-R620E

Reviews:

Related manuals for NP-R620E

Brands by name

Popular brands