manualshive.com logo in svg

Samsung NM30, User Manual

Share
Download
Samsung NM30 User Manual Download Page 103

90  Users Manual

Windows Related 

Q1 The system does not shutdown properly.

A

When the system does not shutdown normally, press and hold the Power button 
until the system manually shuts off. If the Power-Saving Mode is configured into 
the Power button, press and hold for more than 4 seconds to shut the system off. 

Q2 The system freezes during program operation
A1

There is an error with the program currently being used. Press the <Ctrl>, <Alt>, 
and <Delete> keys simultaneously and click and Task in the [Windows Task 
Manager] window. 

A2

There is an error with the Windows OS. Reboot the system by using the Power 
button.

Q3 The sound plays abnormally when the equalizer configuration is changed in 

an audio player program.

A

The audio device of this computer is optimized by a hardware equalizer (EQ). 
Therefore, changing the configuration using the software equalizer (EQ) of an 
audio player program may distort the sound. It is recommended not using the 
equalizer function.

Summary of Contents for NM30









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands