20
Assigning address to indoor unit
1. Before installing the Unidad interior, assign an address to the Unidad interior according to the air conditioning
system plan.
2. The address of the Unidad interior is assigned by adjusting MAIN(SW02).
3. The MAIN address is for communication between the Unidad interior and the Unidad exterior. Therefore, you
must set it to operate the air conditioner properly.
4. It is required to set the RMC address if you install the wired remote control and/or the centralized control.
5. If you install optional accessories such as the wired remote control, centralized control, etc. see an appropriate
installation manual.
6. If an optional accessory is not installed, you do not have to set the RMC address. However, adjust K1 and K2
switches of the SW04(SW05) DIP switch to "ON" position in this case.
◆
NJ
TTT
1HXCA
SW05
SW06
SW07
SW02 MAIN
SW04 RMC
◆
NJ
TTT
MHXCA
SW05
SW06
SW07
SW01 MAIN
SW03 RMC
SW02 MAIN
SW04 RMC
NJ＊＊＊1HXCA_IM_E_33584-1.indd 20
2011-03-28 오후 4:35:37
Summary of Contents for NJ***1HXCA
Page 24: ......
