Samsung NH300WHXES, User Manual

Page: 29 / 52

Operating advanced function
_29
ENGLISH
FIELD SETTING MODE
Setting the Field Setting Value of wired remote controller
Field setting mode is to adjust specific functions in accordance with customer’s demands.
Field setting mode is easy-to-access and programmable by the wired remote controller of hydro
unit.
Field setting values are consisted of 4 digits.
Adjusting filed setting values is available in the unit operation.
Default field setting value and range is on 32~34 pages.
1.
Press the
Test
button for 5 seconds.
The mode changes to the field setting.
In this mode, you can only use Up

, Down

, Set ,
Cancel/Delete button.
To cancel the setting, press Cancel/Delete button.
2. Set the Main Menu by pressing Up

or Down

button.
The “Number” will blink. Set the Main menu and press
Set button to save the setting.
3. Set the Sub Menu by pressing Up  or Down  button.
The “Number” will blink. Set the Sub menu by pressing
Up

or Down

button. Then press Set button to save
the setting.
4.
Set the Operation Range(Field Setting) by pressing
Up

or Down

button.
The digits in “Temp” category will blink. Set the Field
Setting Value by pressing Up  or Down  button.
Then press Set button to save the settings.
After 5 seconds, The LCD shall go back to initial display.
If no input for setting value changes, the LCD shall go
back to initial display after 30 seconds.
Main menu
Sub menu