Samsung NF108 Page 38 User Manual Download

Page: 38 / 88

European Union CE Marking and

Compliance Notices

Products intended for sale within the

European Union are marked with the

Conformité Européene (CE) Marking, which

indicates compliance with the applicable

Directives and European standards and

amendments identified below. This equipment

also carries the Class 2 identifier.

The following information is only applicable

to systems labeled with the CE mark

European Directives

This Information Technology Equipment has

been tested and found to comply with the

following European directives:



EMC Directive 2004/108/EC



Low Voltage Directive 2006/95/EC



R&TTE Directive 1999/5/EC

Manufacturer Information

Samsung Electronics Co., Ltd.

416, Maetan-3Dong, Yeongtong-Gu, Suwon-

City, Gyeonggi-Do, 443-742, Korea

Samsung Electronics Suzhou Computer CO.,

LTD

No. 198, Fangzhou Road, Suzhou Industrial

Park, Jiangsu Province, 215021, China

Tel:+86-512-6253-8988
For the web or the phone number of

Samsung Service Centre, see the Warranty

or contact the retailer where you purchased

your product.

European Union

Summary of Contents for NF108

























































































Search results

Summary of Contents for NF108

Reviews:

Related manuals for NF108

Brands by name

Popular brands

Samsung NF108, User Manual

Search results

Summary of Contents for NF108

Reviews:

Related manuals for NF108

Brands by name

Popular brands