12 English
Ins
tallation
Installation
Power connection
WARNING
The electrical connection of this appliance
should be carried out by an authorised service
person or qualified electrician, according to the
instructions in this guide and in compliance with
the current local regulations.
WARNING
THE APPLIANCE MUST BE EARTHED.
•
Before connecting the appliance to the power
supply, the voltage rating of the appliance
(stamped on the appliance identification plate)
must be checked for correspondence to the
available mains supply voltage, and the mains
electric wiring should be capable of handling
the appliance’s power rating (also indicated on
the identification plate).
•
The oven and hob are connected by sockets
with each other.
•
During installation, please ensure that isolated
cables are used. An incorrect connection could
damage your appliance. If the mains cable is
damaged and needs to be replaced this should
be done by a qualified person.
•
Do not use adaptors, multiple sockets and/or
extension leads.
•
The supply cord should be kept away from hot
parts of the appliance and must not be bent
or compressed. Otherwise the cord may be
damaged, causing a short circuit.
•
If the appliance is not connected to the mains
with a plug, a all-pole disconnector switch
(with at least 3 mm contact spacing) must be
used in order to meet the safety regulations.
•
The appliance is designed for a power supply
of 220-240V ~ and 380-415V 3N~. If your
supply is different, contact the authorised
service person or a qualified electrician.
•
The power cable (H05VV-F) must be long
enough to be connected to the appliance,
even if the appliance stands on the front
of its cabinet.
•
Ensure all connections are adequately
tightened.
•
Fix the supply cable in the cable clamp
and then close the cover.
•
The terminal box connection is placed on
the terminal box.
N
Blue
Green
L
Brown
230V~ 5G2.5 mm
2
/3G2.5 mm
2
•
Installation of the yellow-green grounding
cable should be done as shown in the
picture using the screw and washer
located in the document bag. This
procedure should be applied when the
oven is installed.
a
Nut
c
Washer
b
Grounding cable
d
Screw
