Samsung n102sp User Manual Download

Page: 43 / 118

Chapter 2

Using the computer

Touchpad On/Off Function

Locking with shortcut keys

If you want to use the mouse only without using the touchpad,

you can turn the touchpad off .

To lock the touchpad function, press the

keys.

You can set the touchpad and touchpad button settings in

the tabs that appear when clicking

Start > Control Panel >

Hardware and Sound > Mouse

Auto-locking when connecting USB mouse

►

When using the Elan driver

Click

Start > Control Panel > Hardware and Sound > Mouse

> ELAN

, and check the

Disable When external USB mouse

plug in

option. This will turn the touchpad off when a USB

mouse is connected.

►

When using the Sysnaptics driver

Click

Start > Control Panel > Hardware and Sound > Mouse

> Device Settings

, and check the

Disable internal pointing

device when external USB pointing device is attached

option. This will turn the touchpad off when a USB mouse is

connected.

In case of some touch-screen model, checking option locks

touchpad even though you did not connect a USB mouse.

This auto-locking function is not provided for some models.

Touchpad

Summary of Contents for n102sp























































































































Search results

Summary of Contents for n102sp

Reviews:

Related manuals for n102sp

Brands by name

Popular brands

Samsung n102sp, User Manual

Search results

Summary of Contents for n102sp

Reviews:

Related manuals for n102sp

Brands by name

Popular brands