Samsung MXD-K025AN, Installation Manual

Page: 27 / 40

26

FUNCTION SETTING
(Continued)
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation 1
(When setting SEG3)
Standard for mode
changing Cooling

Heating mode
(When setting SEG3)
Time required for
mode change
Compensation option
for Long pipe or height
diffference between
indoor units
- -
Remote
Controller
Display
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
- -
0 1 0 5 min. 0
Use default
value
1 1.5 1 7 min.
1
1) Height
difference
1)
is more than
30m or
2) Distance 2)
is longer than
110m
2 2 2 9 min.
3 2.5 3 11 min.
4 3 4 13 min.
2
1) Height
difference
1)
is
15~30m or
2) Distance 2) is
50~110m
5 3.5 5 15 min.
6 4 6 20 min.
7 4.5 7 30 min.
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation - - - -
- -
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE AHU Kit capacity setting Fan Feedback Defrost Signal Prevent cold wind
-
Remote
Controller
Display
-
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
3
0 Default 0 Disuse 0 Disuse 0 Disuse
1 Default x 1 1 use 1 use 1 use
2 Default x 2
3 Default x 3
4 Default x 4
1)
Height difference : The difference of the height between the corresponding indoor uint and the indoor unit installed at the lowest place.
For example, When the indoor unit is installed 40m higher than the indoor unit installed at the lowest place, select the option
“1”.
2)
Distance : The difference between the pipe length of the indoor unit istalled at farthest place from an outdoor unit and the pipe length of the
corresponding indoor unit from an outdoor unit.
For example, when the farthest pipe length is 100m and the corresponding indoor unit is 40m away from an outdoor unit, select the
option “2”. (100 - 40 = 60m)
NASA PJT_AHU Kit_MXD-K@@@AN Series_EN_03711A(1).indd 26 2013-01-11 오후 3:20:35