Samsung MX-T70, User Manual

Page: 19 / 28

ENG - 12 ENG - 13
Connecting a mobile device via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
Bluetooth device
PAIRING ADD STEREO GROUP PLAY
USB1
(5V 2.1A)
USB2
(5V 0.5A)
LIGHT
PAIRING
TEMPO
USB AUX
EFFECT
DOWN UP
EFFECT DJ
SOUND
MODE
OR
The initial connection
1. Press and hold the PAIRING button on the remote control for a moment to enter the
“ BT PAIRING ” mode.
(OR)
Press the PAIRING button on the rear panel or press and hold the (Source) button on
the top panel for a moment to enter the “ BT PAIRING ” mode.
2. On your device, select “ [AV] Samsung Party T70 ” from the list that appears.
• When the Party Audio is connected to the Bluetooth device, [ Bluetooth Device Name ] → “ BT ”
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Party Audio.
If the device fails to connect
• If a previously connected Party Audio listing (e.g. “ [AV] Samsung Party T70 ”) appears in the list,
delete it.
• Then repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Party Audio.
• BT PAIRING : In this mode, you can connect a new device to the Party Audio.
(Press and hold the PAIRING button on the remote control or the (Source) button on top of
the Party Audio for more than 5 seconds to enter the “ BT PAIRING ” mode.)
– You can also press the PAIRING button on the rear of the Party Audio to enter the “ BT
PAIRING ” mode.
Bluetooth Multi connection
The Party Audio can be connected to 2 Bluetooth devices at the same time.
Bluetooth device 1 Bluetooth device 2
1. Connect the Party Audio to a Bluetooth device. (See page 12)
2. If you connect the 3rd Bluetooth device while 1st and 2nd Bluetooth devices are connected, the 1st
and 2nd devices are disconnected. The maximum connecting 2 devices.
3. Play music from one of the connected Bluetooth device while dual Bluetooth connection.
Another Bluetooth device pauses.
• Playback may not pause depending on the devices.
NOTES
• You can connect up to two Bluetooth devices at a time.
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• It may cause malfunction due to environment or other device effect.
• The Party Audio automatically turns off after 20 minutes with no order input in the Ready state.
• The Party Audio may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Party Audio.
– If several Bluetooth devices are simultaneously paired with the Party Audio.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Party Audio main unit - e.g., microwaves, wireless LAN devices, etc.
• When the Party Audio is connected to your TV by Bluetooth connection, the video on the TV and
audio from the Party Audio may not be synchronized because the distance between the Party
Audio and the TV is too far. It is recommended to move the Party Audio closer to your TV within
3.3 ft (1 meter).
• When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other
Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi
connection mode will be canceled.