Samsung MX-T70, User Manual

Page: 15 / 28

ENG - 8 ENG - 9
• All slave must be connected one by one. For example, after Host is connected, press GROUP PLAY
button in slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and slave
3 one by one sequentially.
• While in Group Play connection, currently connected Bluetooth connection is disconnected and
Bluetooth connection is disabled.
• Bluetooth device can search and connect with the host Party Audio only. Slave Party Audio systems
cannot be searched or connected on the Bluetooth device.
• If you power off and then power on the Party Audio or select the source other than BT in Group Play
mode, the Group Play mode is disconnected.
• This product does not support aptX audio stream with Wireless Group Play mode.
Disconnecting the wireless Group Play mode
1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play
connected or press the GROUP PLAY button (Host or Slaves) before Group Play connected.
• “ OFF-GROUP PLAY ” appears on the display and the LED above the GROUP PLAY button is off.
2. If you select the source other than BT or powered off on the host Party Audio, the Group Play
mode is disconnected.
• If the disconnection has made from the host Party Audio, all the Group Play connection is
disconnected.
LED Indications
LED STATE Description
Green
Blink Waiting for a wireless Group Play connection.
On The wireless Group Play connection has made.
Red On An error occurs in the wireless Group Play connection.
Using the Stereo Group mode
You can enjoy the stereo sound by connecting two Party Audio systems.
ADD STEREO ADD STEREO
Left Party Audio
(Master)
Right Party Audio
(Slave)
1. Press the ADD STEREO button on the left Party Audio system. The “ ADD STEREO ” message
appears on the display and the LED blinks on the ADD STEREO button.
2. Press the ADD STEREO button on the right Party Audio system. The “ ADD STEREO ” message
appears on the display and the LED blinks on the ADD STEREO button.
3. When the connection has made, The “ BT PAIRING ” message appears on the master Party Audio
system and the “ STEREO MODE ” appears on the slave Party Audio system.
• The master Party Audio system output left channel sound and the slave Party Audio system
output right channel sound. If you want to change the sound channels of Party Audio systems,
press the
ADD STEREO button on the current master Party Audio system.
4. Play music on the Party Audio. Sound output from both Party Audio systems.
NOTES
• To use the Stereo Group mode, both Party Audio systems must be the same model.
• It may cause malfunction due to environment or other device effect.
• If the red LED is on the ADD STEREO button, an error has occured in the Stereo Group connection.
Try step 1 and step 4 again.
• All the buttons except ADD STEREO button and Power button on the slave Party Audio systems are
not available while in Stereo Group mode.
• The GROUP PLAY button on the host Party Audio system is not available while in Stereo Group
mode.