02
Getting Started
Attaching the toroidal ferrite core to the power cord
Attaching the Toroidal ferrite core to the power cord helps prevent RF interference from radio signals.
1.
Pull the fixing tab of the Toroidal ferrite core to
open it.
2.
Make two loops around the core with the power
cable. See the illustration below.
3.
Attach the Toroidal ferrite core to the power cord
as shown in the illustration below, and then press
it until it clicks.
Looping the power cable around the toroidal core
Lift up to release the
lock and open the
core.
Make two loops around the core
with the power cable. (Start winding
5 to 10 cm [2 - 4 in.] away from the
core).
Close the lock.
➜
➜
➜
11
English
[MX-HS8000-XE]AH68-02686Q-03ENG.indd 11
2014-05-26 오후 5:35:06